Fujitsu fi-6800 - Back

Index
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Contents
TOP
14
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
Back
USB Connector
For connecting a USB cable.
SCSI Connector (fi-6800)
For connecting a SCSI cable.
SCSI ID Switch (fi-6800)
Used to configure the SCSI ID (Factory default setting: 5).
Ventilation Port
An outlet for ventilating hot air from inside the scanner.
Power Connector
A connector for the power cable.
Main Power Switch
Powers ON/OFF the scanner.
VRS Board (optional) slot (fi-6800)
For connecting the VRS board (optional) to use Kofax VRS
(optional).
For details, refer to "A.4 Scanner Options" (page 188).