Fujitsu fi-6800 - Settings Related to Power ON;OFF Control; Setting the Paper Separation Force Upon; [Retain Current Paper Thickness]

Index
Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Contents
TOP
179
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Replacing
Consumables
Scanner
Overview
Operational
Settings
Setting the Paper Separation Force upon Turning
the Power Off
[Retain current paper thickness]
Specify whether or not to memorize the paper separation force
setting of the operator panel upon turning the power off.
1 Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (page 132).
2 From the listing on the left, click [Device Setting 2] 
[Retain current paper thickness].
3 Specify whether or not to memorize the paper separation
force setting of the operator panel upon turning the power
off.
When [Remember] is selected, you can use the memorized setting
next time the scanner is powered on.
8.7 Settings Related to Power ON/OFF Control