Fujitsu fi-6800 - 8.1 Starting Up the Software Operation Panel

Index
Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Contents
TOP
132
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Replacing
Consumables
Scanner
Overview
Operational
Settings
Software Operation Panel is installed together with TWAIN
driver/ISIS driver.
With this application, you can configure various settings for
operating the scanner and managing the consumables.
1 Confirm that the scanner is connected to your computer,
then power on the scanner.
For information on how to turn the power on, refer to "1.3 Turning the
Power ON/OFF" (page 16).
2 Select the [start] menu  [All Programs]  [Scanner
Utility for Microsoft Windows]  [Software Operation
Panel].
 The [Software Operation Panel] dialog box appears.
8.1 Starting Up the Software Operation Panel
Do not use the operator panel while the Software Operation
Panel is running.