Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
139
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
■Messages for Cleaning or Replacing Consumables
The following message may appear while the scanner is in
use:
Check the message, and replace the consumable or perform
cleaning accordingly.
If you click the [Ignore] button, the message disappears and
the scan can be continued. However, it is recommended that
you replace the consumable as soon as possible.
To stop the scan and replace the consumable right away, click
the [Cancel] button.
For details about replacing consumables, refer to the
following:
Brake roller
"6.2 Replacing the Brake Roller" (page 85)
Pick roller
"6.3 Replacing the Pick Roller" (page 87)
For details about cleaning, refer to "Chapter 5 Daily Care"
(page 72).
Message for replacing consumables
Message for cleaning
To Next Page
Loading...
