LifeBook E Series - Section 2
24
About the battery
Charging the battery
1. Connect the AC adapter to your computer.
As soon as you connect the AC adopter to
your computer, the computer begins to
charge the battery pack, and the charging
status indicator ( ) on the status indicating
LCD goes on and shows the power level
(state of charge) of the internal battery pack
at that time.
2. After the charging indicator has gone off,
disconnect the AC adopter.
Charge the supplied battery pack before
using it for the first time after purchase or
if it is not recharged for more than one
month.
When the battery gets fully charged, the
charging status indicator goes off and the
power level indicator at the left end stops
blinking ( ) and lights up ( ). Give
yourself enough time to charge the
battery to ensure that the battery is fully
charged.
When the battery pack is 90% or more
charged, it cannot be recharged even
when the AC adapter is connected. The
battery pack can be recharged when its
power level (or remaining battery life) is
89% or less.
When the computer is turned off, the
charging status indicator on the status
indicating LCD go off soon after the
completion of charging.
The chargeability of the battery pack
decreases when it is charged in an very
hot or cold place.
LB_Railto 06 (24-30) 17/4/03, 6:26 PM24
To Next Page
Loading...
Need help?
General
