Wireless LAN Function
61
Setting the file sharing function
The procedure for setting the file-sharing function
is shown below taking the “work.” folder within
drive C as an example.
1. Double-click [My Computer] on the Desk-
top, and then double-click [Local disk
(C:)].
2. Right-click the “work.” folder, and then
click [Sharing] in the menu displayed.
The [work properties] window will be dis-
played.
3. Select [Share this folder] and then enter
data in necessary items.
• “Share Name”
Enter the name of the folder to be shared.
• “Comment”
Enter explanatory statements on the
folder to be shared.
• “User limit”
Enter the number of users who share the
folder.
• “Access permission”
Enter the access level with respect to the
folder.
• “Cache”
Set the cache for the folder.
4. Click the [OK] button.
The folder will be set as a sharable folder,
and the display of the icon for the “work.”
folder will change.
Setting the printer-sharing function
1. Click the [Start] button, [Setting], and
[Printers].
A list of connected printers will be displayed.
2. Right-click the printer for which the shar-
ing function is to be set, and then click
Confirming connection
After you have finished the network setup op-
erations, access the folder whose sharing has
been set for other personal computers. Also,
confirm the status of the radio waves in case of
trouble such as a network connection failure.
Connecting your personal
computer to another
personal computer
1. Double-click [My Network] on the Desk-
top.
The window [My Network] will be displayed.
2. Double-click the [Computers near me]
icon.
The personal computers connected to the
network will be listed.
3. Double-click the name of the personal
computer to which you wish to connect
your own personal computer.
The folder that has been set in [Shared folder]
will be displayed.
4. Double-click the folder to be accessed.
The contents of the folder will be displayed
to indicate that the folder has become us-
able.
In the case of infrastructure connection,
enter the necessary data for the Access
Point before confirming connection. Re-
fer to the manual of the Access Point for
the Access Point setup procedure.
LB_Railto 10 (56-62) 21/5/03, 2:18 PM61
To Next Page
Loading...
Need help?
General
