Fujitsu Primergy RX300 S2 - Page 100

100 Options Guide RX300 S2
Installing 2nd SCSI backplane Converting from 1- to 2-channel version
Figure 83: Cabling the second SCSI backplane
Ê Connect the I
2
C cable (1), the power cable (2) and the SCSI-cable (3) to the
SCSI backplane.
I Do not insert the SCSI signal cable.
Ê Connect the SCSI cable to (4) and (5) of the system board.
Ê Reinstall the fan box and the fan box air duct.
Ê Reinstall the drives.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter „Completion“ on page 107.
23
4
1
5