Fujitsu PRIMERGY TX200 S2 Options Guide

U41593-J-Z156-2-76 Options Guide 57
8 Controller in the PCI slots
V CAUTION!
Observe the safety instructions in the chapter “Safety notes” on
page 13ff.
The system board offers five PCI slots. The bus frequency of PCI slot 5 is
33 MHz, of the PCI slots 3 and 4 100 MHz/133 MHz and of the PCI slots 1 and 2
66 MHz.
The hardware of the system board optimizes the speed of the PCI bus (IOOP™)
for PCI slots 3 and 4, depending on how the slots are equipped. If only one of
this two slots is occupied, the PCI bus speed is 133 MHz. For all other
equipment variants the PCI bus speed is 100 MHz.
The PCI slot 1(blue socket) is prepared for Zero Channel RAID (ZCR).
PCI slot 5 is equipped with a pull-out aid to guarantee the cooling of the system.

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English