Fujitsu PRIMERGY TX200 S2 Options Guide

40 Options Guide U41593-J-Z156-2-76
Replacing the processor Processors
6.2 Replacing the processor
V CAUTION!
Only processors of the same type may be used on the system board. The
second processor must have at least the same clock frequency as the
first processor. The server always configures itself to the lower clock
frequency of the two processors. For dual operation, use a suitable multi-
processor operating system.
Ê Open the server as described in the chapter “Preparation” on page 19ff.
Ê Remove the ventilation duct over the main memory (see page 28).
Ê Remove the ventilation duct over the system fans (see page 32).
Ê Remove the heat sink holder (see page 33).
Ê Remove the processor fan holder (see page 35).

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English