U41593-J-Z156-2-76 Options Guide 67
9 RemoteView components
V CAUTION!
Observe the safety instructions in the chapter “Safety notes” on
page 13ff.
9.1 Installing the chipDISK
V CAUTION!
If the chipDISK has been installed it is not possible to use the ATA port.
Ê Open the server as described in the chapter “Preparation” on page 19ff.
Figure 53: Installing the chipDISK
Ê Connect the chipDISK to the plug-in location on the system board.
V CAUTION!
Note the coding of the chipDISK and plug-in location.
To Next Page
Loading...
