72 Options Guide U41593-J-Z156-2-76
Installing the external SCSI interface External SCSI interface
Figure 58: Fastening the plug connector at the rear of the housing
Ê Remove the two threaded bolts from the plug connector.
Ê Feed the plug connector through the notch at the rear of the housing.
Ê Fasten the plug connector to the rear of the housing using the threaded bolts
removed beforehand (see arrow).
Ê Reinstall the processor fan holder (see page 38).
Ê Reinstall the ventilation duct over the system fans (see page 39).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion” on page 97ff.
To Next Page
Loading...
