Fujitsu PRIMERGY TX200 S2 Options Guide

94 Options Guide U41593-J-Z156-2-76
Converting from the floorstand model to the rack model
Figure 78: Removing the feet
Ê Remove four screws from each of the feet.
Ê Remove the feet.
I The feet are no longer required.
Figure 79: Removing the bar
Ê Remove the three screws (1) on the bar.
Ê Push the bar to the rear (2) until the hooks disengage.
Ê Remove the bar (3).
I The bar is no longer required.
1
1
1
3
2
Haken

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English