Fujitsu PRIMERGY TX200 S2 Options Guide

96 Options Guide U41593-J-Z156-2-76
Converting from the floorstand model to the rack model
Ê Reestablish all connections to the drives.
Ê Reinstall the ventilation duct over the system fans (see page 39).
Ê Attach the rack front cover, close the server, connect it to the power outlet,
and switch it on as described in the chapter “Completion” on page 97ff.
To enable the rack model to be presented correctly in ServerView, proceed as
follows:
Ê Place the ServerStart CD-ROM in the drive.
Ê Under the path \Tools\System Configuration start the SCU_Chassis Model
Conversion program and change the server type to "PRIMERGY TX200S2
Rack".

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English