Fujitsu ScanSnap iX500

Registering a Client Certificate or CA Certificate (iX1600 / iX1500)
To connect the ScanSnap to a wireless access point, use a client certificate or CA certificate that
has been registered on the ScanSnap to authenticate a connection to the wireless access point.
One certificate for each certificate type (client certificates and CA certificates) can be registered on
the ScanSnap.
To register a client certificate or CA certificate, use the ScanSnap Wireless Setup Tool.
Follow the procedure below to start the ScanSnap Wireless Setup Tool.
l Windows 10
Select [Start] menu → [ScanSnap Manager] → [ScanSnap Wireless Setup Tool].
l Windows 8.1
Click the down arrow on the lower left side of the Start screen, and select [ScanSnap Wireless
Setup Tool] under [ScanSnap Manager] on the All apps screen.
l Windows 7
Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Wireless Setup
Tool].
For details about registering a client certificate or CA certificate, refer to the ScanSnap Wireless
Setup Tool Help.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1600 / iX1500)
148