Feed Guide
Top Cover
Output Guide
3. Clean the following locations with a cloth moistened with Cleaner F1.
Glass (x 2)
Idler Roller (x 12)
l Glass (× 2, one on the top cover and one on the opposite side)
Gently wipe the dirt and dust off the surface of the glass sections.
l Idler roller (× 12, located on the top cover)
Gently wipe the dirt and dust off the rollers as you rotate them manually. Be careful not
to damage the surface of the rollers. Make sure that they are cleaned properly because
residue on the rollers will affect the feeding performance.
2. Clean the feed rollers and eject rollers.
1. Press the [Scan/Stop] button for 3 seconds with the top cover open.
2. Clean the following locations with a cloth moistened with Cleaner F1.
Cleaning iX100
451
To Next Page
Loading...
