Timed Mode
The ScanSnap automatically starts scanning after the specified time period passes.
This is useful also for scanning multiple documents (of any type) consecutively.
There are two types of settings for timed mode:
l Setting the time period before the ScanSnap starts scanning a document after the [Scan] button
is pressed
l Setting the time period for the ScanSnap to start the next scan when a document is scanned
continuously
For details, refer to "Scanning Documents Using Timed Mode (SV600)" (page 294).
Correcting Scanned Images
After the documents are scanned with the ScanSnap, the scanned images can be corrected.
The following functions are available:
When a document is scanned
l "Filling in Fingers Captured in a Scanned Image (When a Document Is Scanned)(SV600)"
(page 385)
When a book is scanned
l "Correcting Distorted Book Images (SV600)" (page 390)
What You Can Do with the ScanSnap
62
To Next Page
Loading...
