Fujitsu ScanSnap S1100 - Page 281

Actions (for Mac OS users)
281
3. Change settings for the [Scan to Print] (If you do not want to change any
settings, go to step
4.).
1. Click the [Application Setting] button.
The [Scan to Print - Options] window appears.
2. Change the settings.
For details about the [Scan to Print - Options] window, refer to the ScanSnap
Manager Help.
3. Click the [OK] button to close the [Scan to Print - Options] window.
4. Click the [Apply] button in the ScanSnap setup window.
5. Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
6. Load the document in the ScanSnap.
For details about how to load documents, refer to
"How to Load Documents" (page 30).