What to do with error 'Press to resume, to SETUP' on Fujitsu stylistic q555?
If you see the error message 'Press to resume, to SETUP' on your Fujitsu Tablet, press F1 / Windows button to continue. Alternatively, press F2 / Decrease volume button to enter the BIOS-Setup-Utility.
What to do if Smart Card reader is not recognized on Fujitsu stylistic q555?
If the Smart Card reader on your Fujitsu Tablet is not recognized, make sure you have inserted your Smart Card into the Smart Card reader with the chip facing upwards / downwards (device-dependent). Also, check whether the Smart Card you are using is supported and complies with the ISO standard 7816-1, -2, -3 and -4.
How to fix wireless connection on Fujitsu stylistic q555?
If the wireless connection on your Fujitsu Tablet isn't working, first ensure the wireless component is switched on. If it is on but the connection still fails, check whether the wireless connection is enabled by the software.
How to fix printer not printing from Fujitsu Tablet?
If your printer is not printing from your Fujitsu Tablet, ensure that the printer is switched on and ready for operation. Check that the data cable between the Tablet PC and the printer is properly connected. Also, check whether the correct printer driver is loaded.
Why does my Fujitsu Tablet keep stopping?
Your Fujitsu Tablet PC might stop working due to several reasons. It could be in energy-saving mode, so end the energy-saving mode. An application program might have caused the malfunction, so close the application or restart the Tablet PC. Additionally, the battery might be dead, so charge the battery or connect the AC adapter to the Tablet PC.
What to do if my Fujitsu Tablet does not start?
If your Fujitsu Tablet PC doesn't start, try the following: Ensure the battery is charged by connecting the AC adapter to the tablet. Also, verify that the AC adapter is properly connected to the Tablet PC. Finally, switch the Tablet PC on.
How to fix keyboard error on Fujitsu stylistic q555?
If you're experiencing a keyboard error on your Fujitsu Tablet and you're using an external keyboard, check the connection and reboot the Tablet PC.
Why doesn't the battery indicator light up on my Fujitsu Tablet?
If the battery indicator does not illuminate on your Fujitsu Tablet, the battery is likely discharged. Charge the battery or connect the Tablet PC to a power outlet using the AC adapter.
What to do if stylus input is not working on Fujitsu Tablet?
If the stylus input is not working on your Fujitsu Tablet, reinstall the driver for the 'dual digitizer'.
What to do if my Fujitsu Tablet PC stops working?
If your Fujitsu Tablet PC stops working, it may be in energy saving mode, so end energy saving mode. An application program may have caused the malfunction, so close the application program or restart the Tablet PC. The battery may also be dead, so charge the battery or connect the AC adapter to the Tablet PC.
Essential safety information for working with the Tablet PC.
Step-by-step guide to connecting the AC adapter for power.
Procedure for powering on the Tablet PC for initial use and setup.
Steps to power on the Tablet PC and program the ON/OFF button.
Procedures for correctly shutting down the Tablet PC.
Guide to using the stylus for navigation and input.
Describes the docking cradle and its components.
Steps to dock the Tablet PC into the cradle.
Steps for attaching the Tablet PC to the keyboard cover.
Steps to set up and use the fingerprint sensor for security.
Setting up supervisor and user passwords in BIOS Setup Utility.
Enabling system protection via password during boot.
Resolving issues with system startup, recovery, and date/time.
Troubleshooting touchscreen, display readability, and stylus input.
Resolving blank or unstable external monitor displays.
Resolving printer, wireless, and battery discharge problems.
Addressing issues with Smart Card reader, PIN, and lost cards.
Processor, memory, touchscreen, dimensions, and ports of the Tablet PC.
Details on wireless network capabilities, transfer rates, and frequencies.
Details on rechargeable battery and AC adapters.
Details on RF exposure limits, SAR, and testing.
Guides for creating recovery images and restoring the system.
To Next Page
General