Furuno FS-5000 - How to up Date the Terminal (IB-581) Program

FELCOM 11
G2-10
9. How to up date the Terminal (IB-581) program
1. Quit the terminal program.
- Press keys, [F1] and [8], successively.
or,
- select "[8]: Quit" in [F1]: File menu, and press [Enter] key.
2. The prompt, "A:\FELCOM11>", will appear on the screen.
3. Insert the floppy disk containing the terminal program into the FD drive.
4. Change to "B" drive by pressing keys,
- [B], [:], and [Enter], successively.
The prompt, "B:\>", will appear on the screen.
5. To update the terminal program,
- press [I], [B], [I], [N], [S], [T], and [Enter] keys, successively.
Reference) When installing terminal program for Russian;
(1) Successively press keys,
- [I], [B], [R], [I], [N], [S], [T], and [Enter].
(2) Pressing [Alt] key while pressing left [Shift] key, alternates the language for
composing messages between English and Russian.
6. Then, the updating will be finished, displaying the prompt "B:\>".
7. Turn off once and on again the terminal unit.
Confirming the program version;
The version of the terminal program appears on the screen when starting terminal
program.