FELCOM 81
H2-20
5. How to update the Terminal program
1. Quit the terminal program.
- Press [F2] key while pressing [Alt] and [Fn] keys.
2. After a message "OK to quit system? Yes/No" has appeared,
- place the cursor on "Yes" and press [Enter] key.
A prompt "A:\>" will appear.
3. Insert the floppy disk containing the terminal program into the FD drive.
4. Change to "B" drive by pressing keys,
- [B], [:], and [Enter], successively.
The prompt, "B:\>", will appear on the screen.
5. To update the terminal program,
- press [I], [N], [S], [T], [A], [L], [L] and [Enter] keys, successively.
6. Then, the updating will be finished, displaying the prompt "B:\>".
7. Turn off once and on again the terminal unit.
Confirming program version
To confirm the version of the terminal program,
- press [F1] key while pressing [Alt] and [Fn] keys.
To Next Page
Loading...
