Furuno FS-5000 User Manual

FELCOM 81
H2-22
6.
Register the telephone number for the loop back service. For example;
Register the telephone number
Parth : *51* 222 0061 29 3334699#
Burum: *51* 012 0031 10 2947020#
You can check register the telephone number ;
Press * 9 6 # on the No.1 telephone.
7. Set the DTR switch on the checker to the upper position to commence the call. TX
and SYNC LEDs on the HSD modem come on. If TX LED does not light, check DIP
switch setting. If the SYNC LED does not come on, the receiver circuit may be
defective.
Figure 2) Front panel of HSD checker
8. LEDs, CR11 to CR18 light irregularly for about 10 seconds. Then, some LEDs
come on according to the setting of the sending data pattern switch.
CR11 to CR18
DTR switch

Furuno FS-5000 Specifications

General

Output Power	150 W (PEP)
Tuning	Synthesized
Type	MF/HF Radio Transceiver
Frequency Range (Transmit)	1.6 to 27.5 MHz
Frequency Range (Receive)	100 kHz to 30 MHz
Modulation	J3E (SSB), H3E (AM)
Emission Modes	J3E, H3E, F1B, A1A
Power Supply	24V DC
DSC	Yes