FELCOM 82
H3-48
3.12.2 Antenna trouble error message
Antenna trouble error message
Error Message Meaning Cause Remedy
OR Change failed. (0100)
Satellite selected from Satellite
menu not acquired.
Satellite is tracked based
on ship’s position.
• Select correct
satellite.
• Check navigator.
Sky Scan failed. (0108)
Satellite not found although all
areas searched.
OR Search failed. (0103) Couldn’t search for satellite.
Equipment trouble or
object in transmission
path of satellite
Check to RF connectors
in Antenna unit.
LNA defective.
OR Search disabled.
(0105)
During the satellite search,
SCAN function is set to
OFF by a SCAN command
and the search operation is
terminated.
Sky Scan disabled.(0110)
During the sky-scan,
SCAN function is set to
OFF by the command and
the scan is terminated.
Step-track halted. (0113)
During the step-tracking,
the step-track function is
set to OFF by the
command and the tracking
is terminated.
Step-track out of bounds.
(0114)
In auto ocean region
selection mode, this
message appears at the
boundary between two
ocean regions, when the
elevation angle decreases
5 degrees or less and a
satellite higher elevation
angle is selected.
• Select correct
satellite.
• Check navigator.
Printer trouble
Printer trouble error message
Error Message Cause Remedy
CAUTION: Main Unit Printer error: off-line. (0169)
CAUTION: Main Unit Printer error: out of paper. (0170)
Printer error
Check
connection,
paper, etc.
To Next Page
Loading...
