Furuno FS-5000 User Manual

K1-3
5. Install the terminal program by using "INSTALL.BAT" file contained in the program.
Press the keys successively according to the terminal to be changed to as follows:
FELCOM-11
- [I],[B],[I],[N],[S],[T] and [Enter]
FELCOM-12
- [I],[B],[I],[N],[S],[T] and [Enter]
FELCOM-81
- [I],[N],[S],[T],[A],[L],[L] and [Enter]
DP-6
- [I],[N],[S],[T],[A],[L],[L] and [Enter]
Programs will be installed automatically. With some terminal programs, follow the
installation instructions that will be shown on the display.
6. When the program has been installed, the prompt "B:¥>" will appear. Then turn off
power.
IB-581

Furuno FS-5000 Specifications

General

Output Power	150 W (PEP)
Tuning	Synthesized
Type	MF/HF Radio Transceiver
Frequency Range (Transmit)	1.6 to 27.5 MHz
Frequency Range (Receive)	100 kHz to 30 MHz
Modulation	J3E (SSB), H3E (AM)
Emission Modes	J3E, H3E, F1B, A1A
Power Supply	24V DC
DSC	Yes