FS-5000/8000
A3-10
9966
In accordance with both the above setting and system setting 9953 (Operation on
AM mode), the transmission of two-tone alarm on AM mode is as follows:
System setting:9966 System setting:9953 TX of two-tone alarm on AM mode.
0: TX/RX
1: RX only
Possible on all frequencies.
2: No Disabled
0:FREE
(Factory setting)
3: 2182 Possible on all frequencies.
0: TX/RX Possible on all frequencies.
1: RX only
2: No
Disabled
1: LIMITED
3: 2182 Possible on 2182 kHz only.
9980
Returns to default setting for each country. For example, enter ā44ā for Europe.
9981
Determines the functions of 9911 and 9923 as follows:
9981 [0] NO [1] YES
9911: Alarm 0-Receive 1-Transmit
9923 : Dummy 1-Inhibit 0-Enable
9982
Determines the functions of 9913 and 9917 as follows:
9982 [0] NO [1] YES
9913 : System 30 ms 10 ms
9917: 50 ohms BK
Relay
0-on/off 1-Permanently on
(fixed)
To Next Page
Loading...
