DSC-6
B2-10
EEROM clear
When select to EEROM, press the [ENT] key;
After about 15 second the power is automatically cut off.
Turn the power on again manually. The initial setting display appears.
(Refer to section “3.1 Initial settings”)
Note)
Before clearing EEROM, print out the contents of EEROM
by pressing the [4] key.
Contents of S-RAM and EEROM
Item Purpose
RAM 1 Clears work area only in the S-RAMs.
RAM 2
Clears all contents of the S-RAMs
(incl. transmitted and received messages, and prepared in
messages in FILE menu: [SELECT] [7])
EEROM
Clears contents of EEROM.
*Settings of [SELECT] and [ALARM STOP] menu.
*Scan programmed frequencies of [SELECT] [0] menu.
*Distress massage
*AD/Tel No./Work-F/DSC-F data of [SELECT] [7] in File
menu
*System setting of [SELECT] [9] menu.
MMSI, data format of navigator (NMEA or CIF),
DMC-5 connection, DP-5/6 connection, installation type,
Tx timing and AF line output level.
TEST
To Next Page
Loading...
