FUTABA 14MZ - Assigning Audio Files to Switches

Assignment of audio fi les to switches
*Audio fi les can be saved to CF card beforehand.
1. Touch the fi le button of the No. you want to
set. A list of the fi les stored on the CF card is
displayed.
2. Select the audio fi le you want to play back
from the list of audio fi les.
*Since the audio files are played back when the audio file
names in the list are touched, the file contents can be
checked before assignment.
3. Touch the [File] button to assign the fi les.
4. (Switches are also selected for No. 3~24.)
Touch the [NULL] button to call the Switch select
screen.
Sequentially playing back registered fi le each
time operated by 1 switch
This is used when calling the order of
maneuvers, etc.
[Setting method]
1. After selecting the switch, press the [→]
button. The button display thereafter is
switched as shown in the screen above.
2. Assign the audio fi les in the order in which
you want to play them back.
The audio fi les are played back each time the
switch selected by the above setting is turned on.
5. Select the switch and its ON direction at the
Switch select screen.
(For a detailed description of the selection method,
see "Switch setting method" at the back of this
manual.)
57
<Linkage Menu>