Resetting All Default Settings
Before you reset all default settings, you should sync the watch with the Garmin Connect app to upload your
activity data.
You can reset all of the watch settings to the factory default values.
1 Hold MENU.
2 Select System > Reset.
3 Select an option:
• To reset all of the watch settings to the factory default values and save all user-entered information and
activity history, select Reset Default Settings.
• To delete all activities from the history, select Delete All Activities.
• To reset all distance and time totals, select Reset Totals.
• To delete all downloaded golf course files and reset the last played golf course list, select Reset Golf
Courses.
• To reset all of the watch settings to the factory default values and delete all user-entered information and
activity history, select Delete Data and Reset Settings.
NOTE: If you have set up a GarminPay wallet, this option deletes the wallet from your watch. If you have
music stored on your watch, this option deletes your stored music.
Diving
Resetting Your Tissue Load
You can reset your current tissue load saved on the device. You should reset your tissue load only if you do not
plan to use the device again in the future. This can be useful for dive shops that provide devices for rent.
1 Hold MENU.
2 Select System > Reset > Reset Tissues.
Resetting the Surface Pressure
The device automatically determines the surface pressure using the barometric altimeter. Large pressure
changes, such as during a flight, can cause the watch to automatically start a dive activity. If the watch starts a
dive activity incorrectly, you can reset the surface pressure by connecting the watch to a computer. If you do not
have access to a computer, you can reset the surface pressure manually.
1 Hold LIGHT until the watch turns off.
2 Hold LIGHT to turn on the watch.
3 When the product logo appears, hold MENU until you are prompted to reset the surface pressure.
Troubleshooting 161
To Next Page
Loading...
Need help?
General
