Garmin DESCENT MK3 Series User Manual

Setting the Starting Line
1 From the watch face, press START.
2 Select Sail Race.
3 Wait while the device locates satellites.
4 Hold MENU.
5 Select Start Line Settings.
6 Select an option:
• Select Mark Port to mark the port starting line mark as you sail past it.
• Select Mark Starboard to mark the starboard starting line mark as you sail past it.
• Select Time to Burn to enable or disable the time to burn data on the regatta timer data screen.
• Select Distance to Start to set the distance to the start line, preferred distance units, and length of your
boat.
Starting a Race
Before you can view the time to burn, you must set the starting line (Setting the Starting Line, page44).
1 From the watch face, press START.
2 Select Sail Race.
3 Wait while the watch locates satellites.
The screen displays the regatta timer and time to burn .
4 If necessary, hold MENU, and select an option:
• To set a fixed timer, select Regatta Time > Fixed, and enter a length of time.
• To set a start time within the next 24 hours, select Regatta Time > GPS, and enter a time of day.
5 Press START.
6 Press UP and DOWN to synchronize the regatta timer with the official race countdown.
NOTE: When the burn time is negative, you will arrive at the start line after the race starts. When the burn
time is positive, you will arrive at the start line before the race starts.
7 Press START to start the activity timer.
44 Activities and Apps

Garmin DESCENT MK3 Series Specifications

General

Display Resolution	280 x 280 pixels
Display Type	Sunlight-visible, transflective memory-in-pixel (MIP)
Lens Material	Sapphire crystal
QuickFit Watch Band Compatible	Yes (26 mm)
Memory/History	32 GB
Connectivity	Bluetooth, ANT+, Wi-Fi
GPS	Yes
Display Size	1.4" (35.56 mm) diameter
Case Material	Fiber-reinforced polymer with metal rear cover
Water Rating	Dive (100 meters)
Sensors	Gyroscope, Accelerometer, Thermometer
Diving Features	Dive log, dive planning
Smart Features	Music storage, Garmin Pay, Notifications, Connect IQ
Materials	Fiber-reinforced polymer
Dimensions	51 x 51 x 17.8 mm
Bezel Material	Stainless steel or DLC titanium