Applied Ballistics Options
From the watch face, press START, select Applied Ballistics, and press START.
Quick Edit: Allows you to quickly edit the range, direction of fire, and wind information (Quickly Editing Shooting
Conditions, page68).
Range Card: Allows you to view data for various ranges based on user input parameters. You can change
fields (Customizing the Range Card Fields, page69), edit the range increment (Editing the Range Increment,
page69), and set the base range (Setting the Base Range, page69).
Target Card: Allows you to view range, elevation, and windage for ten targets based on user input parameters.
Environment: Allows you to customize atmospheric conditions for your current environment. You can enter
custom values, use the pressure and latitude values from the internal sensor in the device, or use the
temperature value from a connected tempe
™
sensor (Environment, page68).
Target: Allows you to customize long-range shooting conditions for your current target. You can change the
selected target and customize conditions for up to ten targets (Changing the Target, page69).
Profile: Allows you to customize gun properties (Editing Gun Properties, page70), bullet properties (Editing
Bullet Properties, page70), and output units of measure for your current profile. You can change the
selected profile (Selecting a Different Profile, page69) and add additional profiles (Adding a Profile,
page70).
Change Fields: Allows you to customize the data fields on the profile data screen (Customizing the Profile Data
Screen, page70).
Setup: Allows you to select the units of measure and enable the windage and elevation solution options.
Quickly Editing Shooting Conditions
You can edit the range, direction of fire, and wind information.
1 From the Applied Ballistics app, press START.
2 Select Quick Edit.
TIP: You can press DOWN or UP to edit each value, and press START to move to the next field.
3 Set the RNG value to the target distance.
4 Set the DOF value to your actual direction of fire (either manually or by using the compass).
5 Set the W 1 value to the low wind speed.
6 Set the W 2 value to the high wind speed.
7 Set the DIR value to the direction the wind is coming from.
8 Press BACK to save your settings.
Environment
Editing the Environment
1 From the Applied Ballistics app, press START.
2 Select Environment.
3 Select an option to edit.
Enabling Auto Update
You can use the auto update feature to update the latitude and pressure values automatically. When connected
to a tempe sensor, the temperature value also updates. When connected to a weather meter, the wind speed,
wind direction, and humidity values also update. The values update every five minutes.
1 From the Applied Ballistics app, press START.
2 Select Environment > Auto Update > On.
68 Applied Ballistics
®
To Next Page
Loading...
Need help?
General
