Garmin DESCENT MK3 Series User Manual

Calibrating the Drop Scale Factor
Garmin recommends you calibrate the muzzle velocity prior to the drop scale factor.
Calibrating the drop scale factor provides a more accurate solution at or beyond the transonic range for your
specific firearm.
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > Calibrate DSF.
3 Select an option:
• Select Range to edit the range.
• Select True Drop to edit the drop distance.
4 Select .
Viewing the Drop Scale Factor Table
The drop scale factor table is populated after you calibrate the drop scale factor. If necessary, you can reset the
table values to zero.
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > View DSF Table.
3 If necessary, hold MENU, and select Clear DSF Table.
The table values reset to zero.
Editing the Muzzle Velocity and Temperature Table
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > MV-Temp Table.
3 Hold MENU.
4 Select Edit.
5 Press DOWN or UP to scroll through the table.
6 Press START to edit a value.
7 Press BACK to save your changes.
8 Press BACK.
9 Select Muzzle Velocity > Enable MV-Temp to set the muzzle velocity using the temperature table.
Clearing the Muzzle Velocity and Temperature Table
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > MV-Temp Table.
3 Hold MENU.
4 Select Clear MV-Temp.
Applied Ballistics
®
71

Garmin DESCENT MK3 Series Specifications

General

Display Resolution	280 x 280 pixels
Display Type	Sunlight-visible, transflective memory-in-pixel (MIP)
Lens Material	Sapphire crystal
QuickFit Watch Band Compatible	Yes (26 mm)
Memory/History	32 GB
Connectivity	Bluetooth, ANT+, Wi-Fi
GPS	Yes
Display Size	1.4" (35.56 mm) diameter
Case Material	Fiber-reinforced polymer with metal rear cover
Water Rating	Dive (100 meters)
Sensors	Gyroscope, Accelerometer, Thermometer
Diving Features	Dive log, dive planning
Smart Features	Music storage, Garmin Pay, Notifications, Connect IQ
Materials	Fiber-reinforced polymer
Dimensions	51 x 51 x 17.8 mm
Bezel Material	Stainless steel or DLC titanium