A
PPENDIX
C -
System Functions
Restarting the DS2000-TS
DS2000-TS Administrator’s Guide
C - 4
C.3.2 Warm Restart
This option is used to reboot the DS2000-TS system without losing configuration data. The system
will reboot using configuration parameters that are currently saved in Flash. Since this affects the
system’s availability for a brief period, the command requires the current ROOT password to be
entered to ensure authorized usage. The command presents a list of all operating system versions
presently available in the Flash Memory. The operator can select which version the DS2000-TS
should use when restarting by moving the cursor to the Code Version field and pressing <Enter>.
This will toggle between the oldest and the newest versions of code stored on the system.
C.3.3 Reinitialize
This option is only available if there is a compressed configuration file present (cnfgload.cmp).
Selecting this option uses the cnfgload.cmp file when booting. Since this affects the system’s
availability for a brief period, the command requires the current ROOT password to be entered to
ensure authorized usage. The command presents a list of all operating system versions presently
available in the Flash Memory. The operator can select which version the DS2000-TS should use
when restarting by moving the cursor to the Code Version field and pressing <Enter>. This will
toggle between the oldest and the newest versions of code stored on the system.
Figure C-4. Restart System Menu
*** Restart System ***
Restart Type: Warm Restart
Code Version: 7.0 (RC6)
Password: Password Required
__________[DynaStar_24]___________ Process selections (Y/N): Y
<RET> to toggle or type value Press ESC to return to previous menu
Cursor up/down for more entries
To Next Page
Loading...
Need help?
General
