GarrettCom DynaStar DS2000-TS - DS2000-TS Management Features; D y N a S T a R S U P E R V I S O R; L E D S a N D a L a R M S; S N M P a N D M I B S

C
HAPTER
1 -
D
YNA
S
TAR
2000 S
ECURE
T
ERMINAL
S
ERVER
Product Overview
DS2000-TS Management Features
DS2000-TS Administrator’s Guide
1 - 4
1.4 DS2000-TS M
ANAGEMENT
F
EATURES
This section provides summaries of selected management capabilities for all DS2000-TS services.
1.4.1 DynaStar Supervisor
Chapter 3 provides details on the DynaStar Supervisory application. This menu-based management
application supports configuration, diagnostics, performance monitoring and security functions for the
DS2000-TS. The Supervisor is accessed over the local console port or remotely via an IP network.
1.4.2 LEDs and Alarms
The DS2000-TS has a number of visual alarm and status indicators implemented as LEDs on the wiring
panel of the device. There is also an alarm port that provides a hard contact status indication of major system
failure.
1.4.3 SNMP and MIBs
The DS2000-TS provides an SNMP MIB interface for status, statistics and provisioning. Alarms may be
formatted as SNMP traps to central network management systems.
1.4.4 Security
A number of security options are available for management interfaces to the DS2000-TS. Management
access security includes both logical access (e.g., IP address filtering, IPsec/VPN), and multi-level password
protections. Management data may be encrypted using IPsec with DES or 3DES.