D
ECLARATIONS
Patents
DS2000-TS Administrator’s Guide
iii
P
ATENTS
As to equipment proposed and furnished by Dymec, Inc., Dymec, Inc. shall defend any suit or proceeding brought against
purchaser so far as based on a claim that said equipment constitutes an infringement of any patent of the United States, if
notified promptly in writing and given authority, information, and assistance at Dymec, Inc.'s expense for the defense of
the claim. In event of a final award of costs and damages from such a suit, Dymec, Inc. shall pay such award. In event the
use of said equipment by purchaser is enjoined in such a suit, Dymec, Inc. shall, at its own expense, and at its sole option
either (a) procure for purchaser the right to continue using equipment, (b) modify said equipment to render it non-
infringing, (c) replace said equipment with non-infringing equipment, or (d) refund the purchase price (less depreciation)
and transportation and installation costs of said equipment. Dymec, Inc. will not be responsible for any compromise or
settlement made without its written consent. The foregoing states the entire liability of Dymec, Inc. for patent
infringement, and in no event shall Dymec, Inc. be liable if the infringement charge is based on the use of Dymec, Inc.
equipment for a purpose other than that for which it was sold by Dymec, Inc. As to any equipment furnished by Dymec,
Inc. to purchaser and manufactured in accordance with designs proposed by purchaser, purchaser shall indemnify Dymec,
Inc. against any award made against Dymec, Inc. for patent, trademark, or copyright infringement.
R
ETURN
O
F
E
QUIPMENT
No equipment may be returned without purchaser first obtaining Dymec, Inc.'s written Return Material
Authorization (RMA).
Equipment accepted for credit, not involving a Dymec, Inc. error, shall be subject to all the terms of the original purchase
contract and to a service charge. Returned equipment must be of current manufacture, unused, and in reasonable
condition, securely packed to reach Dymec, Inc. without damage, shipped F.O.B. Dymec, Inc. facility with transportation
charges paid, and labeled with Return Material Authorization (RMA) number. Any cost incurred by Dymec, Inc. to put
equipment in first class condition will be charged to purchaser.
C
OMPLIANCE
N
OTICES
FCC Part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his/her own expense.
Changes or modifications could void the user’s authority to operate the equipment. The user is cautioned not to change or
modify this product.
To Next Page
Need help?
General
