GarrettCom DynaStar DS2000-TS - Supervisor Menus

C
HAPTER
2 -
Supervisor Overview
Supervisor Menus
DS2000-TS Administrator’s Guide
2 - 5
2.4 S
UPERVISOR
M
ENUS
The Main Menu, shown in Figure 2-3, shows the four main branches of the Supervisor command hierarchy.
The submenus in these four main areas of the Supervisor provide a full set of menu-driven commands.
The four subsections shown in the Main menu are:
• Port
• Network
• System
• Security
Figure 2-3. Main Menu
An overview of the Supervisor application menu structure is shown in Figure 2-4. The menu structure is
divided into four sections: Port, Network, System and Security. The figure gives only the top level view of
the menu structure. The following subsections provide high-level descriptions of the structure and uses for
each of these four subsections. The Appendices provide an in-depth reference for each of the Main menu
command areas.
*** Main Menu ***
1 - Port Configuration, statistics, activation, monitoring
2 - Network TCP/IP, Bridge, Terminal Server and Frame Relay
3 - System Event log, buffer status, restart, SNMP, clock set
4 - Security Passwords, menu access and security options
Enter command number:
__________[DynaStar_24]___________
Terminate input with <RET> Press ESC to return to previous menu