GATEXPERT SL500DC - Remote Control Delete(L4)

Instructions for SL500DC/SL800DC
www.gatexpertstore.com
25
control, the gate will open 1m wide to allow pedestrian access.
A. Operation Instruction:
1. Press and hold “-” button for 3 sec. to enter into remote control management mode. 
Indicator light L1 will be steady on.
2. Press “+” button twice to select pedestrian mode function. Indicator light L3 will be
steady on.
3. Press “SET” button once to enter into pedestrian mode setting.  All indicator will
flicker repeatedly from L1 to L5.
4. Press the button which is to be paired on the remote control once.  The indicator
lights L1-L5 will be on in sequence, then all will flicker once and off.. Learning is
complete thereafter.
B. Operation Graphic Illustration:
Remote Control Delete (L4)
This operation will delete all the remote controls that are paired to this control board.
A. Operation Instruction:
1. Press and hold “-" button for 2 sec. to enter into remote control management mode. 
Press “-” for 3 sec.
L1 will be steady on
Press “+” twice
L3 will be steady on
Press “SET” once
Press the button to
be paired twice
Save and exit
SET
L1-L5 will flicker
repeatedly
L1-L5 will be on in
sequence, all
together flicker once