GATEXPERT SL500DC - Running Speed Setting(L1)

Instructions for SL500DC/SL800DC
www.gatexpertstore.com
28
Figure 27
Running Speed Setting (L1)
Users can adjust the gate opening and closing speed according to the actual installation
and using condition.
A. Operation Instruction:
1. Press and hold “PROG” button for 3 sec. to enter into basic menu.  Indicator light L0
will flicker once, then L1 will be steady on.
2. Press “SET” button once to enter into running speed setting.  Indicator lights L1-L5
will show the current running speed. (The default is L5)
3. Press “+” or “-” button to adjust the running speed.  Indicator lights L1-L5 will indicate
different speed status. The more the indicator lights are on, the faster the running speed
will be.
4. Press “SET” button to save and system will automatically exit.  The indicator lights
L1-L5 will be on in sequence, then all will flicker once and off.
B. Operation Graphic Illustration
Running Speed Setting
L1
L2
L3
L4
L5
Slow Stop Speed Setting
L1
L2
L3
L4
L5
Auto-reverse When Meeting
L1
L2
L3 L4 L5
Slow Stop Distance Setting
L1
L2
L3
L4
L5
Standby Mode
Press and hold “+” button for 3 sec.
Basic Menu Setting
Auto-close Function Setting
L1
L2
L3
L4
L5
AObstacles Setting
Press and hold “PROG” for 3 sec.