GATEXPERT SL500DC - Slow Stop Speed Setting(L2)

Instructions for SL500DC/SL800DC
www.gatexpertstore.com
29
Slow Stop Speed Setting (L2)
The setting for slow stop speed can effectively reduce the inertial force when the gate is
open or closed to its limit position, which will extend the lifetime of both gate and gate
opener.
A. Operation Instruction:
1. Press and hold “PROG” button for 3 sec. to enter into basic menu.  Indicator light L0
will flicker once, then L1 will be steady on.
2. Press “+” button to select slow stop speed setting.  Indicator light L2 will be steady on.
3. Press “SET” button once to enter into setting mode.  Indicator lights L1-L5 will show
the current slow stop speed. (The default is L1)
4. Press “+” or “-” button to adjust the slow stop speed.  Indicator lights L1-L5 will show
the different speed status. The more the indicator lights are on, the faster the slow stop
speed will be.
5. Press “SET” button to save and system will automatically exit.  The indicator lights
L1-L5 will be on in sequence, then all will flicker once and off.
B. Operation Graphic Illustration
Press “PROG” for 3
sec.
L0 flicker once, L1
will be steady on
Press “SET” once
Press “SET” once
Press “+” or “-” to set, LED
will show the setting value
L1-L5 will be on in
sequence then all
flicker once and off.
Save and exit
PROG
SET
SET