GATEXPERT SL500DC - Other Menu Setting

Instructions for SL500DC/SL800DC
www.gatexpertstore.com
41
light L1 will show the current setting.
5. Press “+” or “-” button to set the alarm lamp working mode.  Indicator light L1 on or off
will indicate the alarm lamp working mode. (L1 off: blinker; L1 on: steady on)
6. Press “SET” button once to save and system will automatically exit.  The indicator
lights L1-L5 will be on in sequence, then all will flicker once and off.
B. Operation Graphic Illustration
Other Menu Setting
1. Press “PROG” button for 3 Sec. under the standby mode, indicator light L0 will flicker
once to enter into basic menu setting. Press “PROG” button again for 3 sec. indicator
light L0 will flicker twice to enter into the advanced menu setting. Then press “PROG”
button for 3 sec., the indicator light L0 will flicker three times then enter into other menu
setting.
2. Different functions can be selected through “+” and “-” buttons.
3. Press “SET” button to enter into the selected function settings.
Press “PROG” for
3 sec.
L0 flicker once, L1
will be steady on
Press “PROG”
again for 3 sec.
L0 flicker twice, L1
will be steady on
Press “+” for 4
times
L5 will be steady on
Press “SET” once
Press “+” or “-” to set, LED
will show the setting value
Press “SET” once
Save and exit
PROG
PROG
SET
SET
L1-L5 will be on in
sequence then all
flicker once and off.