GATEXPERT SL500DC - Page 38

Instructions for SL500DC/SL800DC
www.gatexpertstore.com
33
4. Press “+” or “-” button to set the auto-close time.  The number of steady on indicator
lights will indicate the Auto-close time. (Table 1 Auto-Close Time)
5. Press “SET” button once to save and system will automatically exit.  The indicator
lights L1-L5 will be on in sequence, then all will flicker once and off.
B. Operation Graphic Illustration
L1
L2
L3
L4 L5
Cancel Auto-close function
L1
L2
L3
L4 L5
L1
L2
L3
L4 L5
L1
L2
L3
L4 L5
L1
L2
L3
L4 L5
L1
L2
L3
L4 L5
Indicator light status：
Off
On
Flicker
Status Instruction
Auto-close after 10 sec.
Auto-close after 20 sec.
Auto-close after 30 sec.
Auto-close after 40 sec.
Auto-close after 50 sec.
Table 1 Auto-Close Time
Press “PROG” for
3 sec.
L0 flicker once, L1
will be steady on
Press “+” 4 times
L5 will be steady on
Press “SET” once
Press “+” or “-” to set, LED
will show the setting value
Press “SET” once
Save and exit
PROG
SET
SET
L1-L5 will be on in
sequence then all
flicker once and off.