Jaguar IV User Manual
GreatCut Instruction A-5
The user manual of GreatCut 2 software is available on the GCC installation CD.
GCC AASII System
Below is a step-by-step instruction of using the AAS function of GreatCut 2 software through
CorelDRAW and Adobe Illustrator.
Edit your image in CorelDRAW
4-Point Positioning
Step 1. Create a new file in CorelDRAW and click on the Create contour icon in the GreatCut 2
toolbar (it would appear automatically once CorelDRAW is open).
GreatCut Instruction
To Next Page
Loading...
