RX Series User Manual
General Information 1-2
4. Accessories
1 piece of User’s Compact Disk
1 piece of AC power Cord
1 piece of data cable (USB cable: 3m)
1 set of Blade Holder Assembly (Installed in tool carriage of the
plotter)
1 piece of Blade (Installed in Blade Holder)
1 piece of Safe Blade
1 piece of Cutting Pad for Vinyl cutting
1 piece of Tweezers
1 piece of Promise Card
1
1.3 Product Features
The following are the main features of the RX series cutting plotters:
‧ Dual port (USB, serial port) connectivity
‧ Up to 600-gram cutting force
‧ Up to 60-inch/per second cutting speed
‧ Can work with up to 0.8mm (0.03in) thick material
‧ Guaranty 10-meter tracking
‧ User friendly, multi-language control panel
‧ Enhanced Automatic-Aligning System for automatic contour cutting
‧ Ingenious media basket (optional item)
To Next Page
Loading...
