GE DigitalFlow GS868 User Manual

Appendix C. Programming with PanaView
104 DigitalFlow™ GF868 Programming Manual (1-Channel)
C.5.2 Reading Transducer Signals
To read a Signal from the meter:
1. Click on the Read Signals button. (If the meter is a multi-channel instrument, open the Channel drop-down menu
and click on the desired channel.) After a moment, the Properties window appears similar to Figure 27.
Figure 27: Active Signal Options
2. To select a different signal type, open the signal menu at the right (shown here with Raw Upstream highlighted)
and click on the desired signal.

GE DigitalFlow GS868 Specifications

General

Brand	GE
Model	DigitalFlow GS868
Category	Measuring Instruments
Language	English