User Manual Druck DPI612
Page 65 of 105 [EN] English – 109M4017 Revision -
Figure 2-20 Measure current on CH1. Range ±55 mA
1. Set the applicable software options.
2. Complete the electrical connections and continue with
the measure or source operation.
3. Source only (Automation). Set the applicable output
value.
b. Example Procedure: Measure Voltage
• Figure 2-21 shows CH1 set-up to measure a DC voltage
(±30 V) or DC mV (±2000 mV).
Figure 2-21 Measure DC Volts or DC mV on CH1.
To Next Page
Loading...
