GE Druck DPI612 - Page 66

User Manual Druck DPI612
Page 66 of 105 [EN] English – 109M4017 Revision -
1. Set the applicable software options.
2. Complete the electrical connections and continue with
the measure operation.
c. Example Procedure: Measure or Source Current with External
Loop drive
• Figure 2-22 and Figure 2-23 show how to set-up to measure
(±55mA) or source (0 to 24mA) a current with external loop
power.
Figure 2-22 Measure current with external loop power (Range: ±55mA)