GE PROPRIETARY TO GE
D
IRECTION 5308917-100, REVISION 8 LOGIQ P3 SERVICE MANUAL
4-6 Section 4-3 - General Procedure
4-3-3-2 Loading Presets from a DVD-R disk (or USB memory device)
1.) Insert the DVD-R disk with the archived Presets into the DVD Drive.
2.) Access to the Utility Menu, and select System. The Restore sheet will be shown on the LCD display.
(see Figure 4-4)
3.) Select the item to restore either from Resource Files.
4.) Enter restore destination or browse through the disk to locate the destination.
5.) Select Restore. The restore status for each item is displayed on the Result column.
4-3-4 Adjusting the Display Monitor
Please refer to Section 6-2 "Monitor Adjustments" on page 6-2.
To Next Page
Loading...
