GE PROPRIETARY TO GE
D
IRECTION 5308917-100, REVISION 8 LOGIQ P3 SERVICE MANUAL
Chapter 1 Introduction 1-1
Chapter 1
Introduction
Section 1-1
Overview
1-1-1 Purpose of Chapter 1
This chapter describes important issues related to safely servicing this ultrasound machine. The service
provider must read and understand all the information presented here before installing or servicing a
unit.
1-1-2 Chapter Contents
1-1-3 Purpose of Proprietary Manual
This Proprietary Manual provides service information for the LOGIQ P3/LOGIQ P3 BT10 Ultrasound
Scanning Systems. It contains the following chapters:
1.) Chapter 1 - Introduction: Contains a content summary and warnings.
2.) Chapter 2 - Pre Installation: Contains pre-installation requirements for the LOGIQ P3/LOGIQ P3
BT10.
3.) Chapter 3 - Installation: Contains installation procedures.
4.) Chapter 4 - Contains functional checks that are recommended as part of the installation, or as
required during servicing and periodic maintenance.
5.) Chapter 5 - Components and Functions (Theory): Contains block diagrams and functional
explanations of the electronics.
6.) Chapter 6 - Service Adjustments: Contains instructions on how to make available adjustments to
the LOGIQ P3.
7.) Chapter 7 - Diagnostics/Troubleshooting: Provides procedures for running diagnostic or related
routines for the LOGIQ P3/LOGIQ P3 BT10.
8.) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly
procedures for all changeable Field Replaceable Units (FRU).
9.) Chapter 9 - Renewal Parts: Contains a complete list of field replaceable parts for the LOGIQ P3/
LOGIQ P3 BT10.
10.)Chapter 10 - Care & Maintenance: Provides periodic maintenance procedures for the LOGIQ P3/
LOGIQ P3 BT10.
Table 1-1 Contents in Chapter 1
Section Description Page Number
1-1
Overview
1-1
1-2
Important Conventions
1-4
1-3
Safety Considerations
1-10
1-4
EMC, EMI, and ESD
1-19
1-5
Customer Assistance
1-20
To Next Page
Loading...
