GE PROPRIETARY TO GE
D
IRECTION 5308917-100, REVISION 8 LOGIQ P3 SERVICE MANUAL
Chapter 8 Replacement Procedures 8-7
9) Loosen the two screw of (A,B) of LCD monitor Arm.Refer Figure 8-6 on page 8-7
Figure 8-6 LCD monitor neck
10) Lift the LCD Assembly upward to remove it from the system. Refer Figure 8-7 on page 8-7
Figure 8-7 Lift LCD monitor
8-2-4-5 Mounting Procedure
1) Install the new parts in the reverse order of removal.
8-2-4-6 Functional Checkout Procedure
See Section Functional Test Debrief Script
4-3-1 Power On/Boot Up
Service Manual Direction 5308917-100, Section 8-2-3. Equipment passes all required tests and is
ready for use.
4-3-2
Power Off/
Shutdown
4-3-4
Adjusting the
Display Monitor
To Next Page
Loading...
