GE PROPRIETARY TO GE
D
IRECTION 5308917-100, REVISION 8 LOGIQ P3 SERVICE MANUAL
8-84 Section 8-10 - Power Cable
Section 8-10 Power Cable
8-10-0-1 Tools
•None
8-10-0-2 Needed Manpower
• 1person, 15 minutes
8-10-0-3 Preparations
• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-10-0-4 Removal Procedure
1. Pull the metal clamp upwards.
2. Remove the power cable as shown in the Figure below.
Figure 8-90 Power Cable
8-10-0-5 Mounting procedure
1.) Install the new parts in the reverse order of removal.
Part Number Description
2365882 Power Cord India
5248395 Power Cord China
5248396 Power cable Europe
5248393 Power cable Japan
5248394 Power cable America
5390874 Power cable Brazil
5398510 Power cable Israel
5182816 Power Cord UK/HK
5182940 Power Cord Italy
5182083 Power Cord Denmark
5182235 Power Cord Switzerland
To Next Page
Loading...
