GE LOGIQ P6 Service Manual

GE HEALTHCARE
DIRECTION 5245279, REVISION 3 LOGIQ™ P6/P6 PRO SERVICE MANUAL
Section 5-1 - Overview 5 - 31
5-7-9 Configuration
Field is not yet populated.
The Configuration page is intended to be used to setup various configuration files on the system.
The Service Platform is the access and authorization control for remote access to the configuration
subsystem..
5-7-9-1 Questra Agent Configuration
These feature that allow the customer to register the system to the GE OnLine Center are available for
Warranty and Contract customers only.
5-7-9-1-1 Device Information
Divce name and CRM No. are displayed by default.
5-7-9-1-2 Advanced Configuration
Select Enterprise Server to check out to.
Figure 5-31 Configuration Page

GE LOGIQ P6 Specifications

General

Type	Ultrasound System
Connectivity	DICOM, USB, Ethernet
Applications	Obstetrics, Gynecology, Vascular, Cardiology, Musculoskeletal
Probes	Convex, Linear, Phased Array
Imaging Modes	B-mode, M-Mode, Color Doppler, Power Doppler, Pulsed Wave Doppler
Portability	Mobile
Transducer Ports	3 active ports