GE LOGIQ P6 Service Manual

GE HEALTHCARE
DIRECTION 5245279, REVISION 3 LOGIQ™ P6/P6 PRO SERVICE MANUAL
3-24 Section 3-11 - Loading Base System Software
Section 3-10
Insite IP Address Configuration
This information needed to facilitate the OnLine Center engineers in connecting to the system is found
in the InSite Installation Manual.
Section 3-11
Loading Base System Software
3-11-1 Loading Base system Software
For more information on loading base system software, refer to the Chapter 8.
Section 3-12
Warnings
3-12-1 Warnings
3-12-1-1 USB HDD
Only 1.8 inch USB HDDs are recommended for the system. Other types are not guaranteed to be
compatible with the system.
3-12-1-2 Starting Echoloader in Maintenance mode
If Echoloader never started once, starting Echoloader in the maintenance mode will not work. In other
words, in order to be able to start Echoloader in maintenace mode, Echoloader should have been
started at least once.

GE LOGIQ P6 Specifications

General

Type	Ultrasound System
Connectivity	DICOM, USB, Ethernet
Applications	Obstetrics, Gynecology, Vascular, Cardiology, Musculoskeletal
Probes	Convex, Linear, Phased Array
Imaging Modes	B-mode, M-Mode, Color Doppler, Power Doppler, Pulsed Wave Doppler
Portability	Mobile
Transducer Ports	3 active ports